MR. FINISHING SURFACER 1500 (40ML)

Mr hobby / gunze sangyo
GSSF289

Commander ou voir le prix?
Cliquez ici pour vous identifier

This surfacer can be applied to give a final finish to the surface more smoothly. It has the characteristic of being fine-grained and it is not prone to clogging up detail in the mold. Most suitable not only for making a base before painting but also for the surface finishing of an original mold before casting.

For the elimination of scratches, irregularities, and defects and to give a smooth surface structure before the final painting. They can be used for plastic, resin, and metal.

 

Mr.Surfacer is acrylic primers based feed, organic solvents, and pigments. They should be diluted with a solvent Mr.Leveling Thinner 110 ml against at least 1: 1-2.


Mr.Surfacer 1500 includes the smallest grain of all 4 Surfacer ( 500,1000,1200,1500 )

 

How to use :
Spread evenly over the entire surface. After 40 minutes, suitable for abrasive machining. After curing, it is recommended that the water polishing paper grit 1000 or higher-paying attention to possible scratches. It is recommended that application and grinding in several layers, until a satisfactory result.

 

Size:

 

40ml liquid

---------------------------------